- On sale!
- -10%
White Crown button 24 mm transparent
The SDB-202 button is the evolution of the SDB-201 version.
This is one of the fastest buttons in the world, thanks to a shorter button press.
A breakthrough for optimal playing comfort.
Crown 24 mm white transparent screw-in button.
This 24mm white translucent button is equipped with a super fast silent microswitch, which will allow you to repeatedly press it very quickly.
This is the most upscale Korean.
Thanks to its new Cherry Linear microswitch included, the button activation distance is 1.2mm (the previous version was 2mm), a gain of 40% to increase the pulse speed. Now you'll be able to spam with all your might.
This button has been tested to work without any problem 50 million times ! A record.
2.8mm lugs are required for connection. Although not intended, you can use 4.8mm lugs.
Features
- Mounting hole size: 24 mm
- Maximum Control Panel size: 11.8 mm
- Switch used: Cherry MX
- Estimated lifetime: 50 million clicks
- Required lugs: 2.8 mm
- Optional : 35 cm cable with a 2.8 mm terminal and a Dupont connector for the GPIO port
Data sheet
- Color
- White
- Button Size
- 24 mm
- Maximum thickness of the control panel
- 11 mm
- Luminous
- Non
- Button shape
- Convexe
- With Clic
- Yes
- Translucent
- Translucent
- Brand
- Samducksa
- Metallic color
- No
Specific References
24 mm ? 30 mm ? What to do ?
Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).
We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.
We will group 28 and 30mm which varies mostly depending on the brand of the button.
Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.
The 24mm buttons are used for the options (like select and start for example).
However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.
Screw button or clip button ?
Depending on your panel, we will prefer one or the other.
For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.
For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.
Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.
Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.
Otherwise it's all good!
Any questions? A doubt? Or a solution?
Please contact us!