Sanwa clip button 24 mm - Purple

€2.25

24mm Sanwa button with clip. Exclusively for metal panels (1.5 mm thick).
White colour for a colourful design in keeping with the Sanwa brand.

Sanwa push button, 24 mm, purple with clips.

Quantity

Sanwa brand 24 mm purple clip button. Perfect for an arcade cabinet or bartop with a plexiglass or metal control panel.

A common ground chain, connected to the ground with the other buttons, is necessary for the proper functioning of the button.
You can mix and match the colors as you like with other Sanwa buttons of the same size.

Features:

- Max hole size: 24 mm
- Maximum mounting plate thickness: 3.7 mm
- Switch used: SW-68
- Estimated lifetime: 1 million times
- Leads required: 2.8mm (although not intended, this switch will also work with 4.8mm)

- Optional : 35 cm cable with a 2.8mm terminal and a Dupont connector for the GPIO port.

Câble Dupont et Cosse 2.8mm

Reference OBSF-24-VI

Data sheet

Color: Purple
Button Size: 24 mm
Luminous: Non
Button shape: Convexe
With Clic: No
Translucent: Non translucent
Brand: Sanwa

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!