Unbranded purple button 30 mm Translucent, 3/4 view.
search
  • Unbranded purple button 30 mm Translucent, 3/4 view.
  • Unbranded purple button 30 mm Translucent, side view.
  • Unbranded purple button 30 mm Translucent, face view.
  • Unbranded purple button 30 mm Translucent, rear view.

Standard 30mm transparent button

€1.99

Generic transparent button 30 mm.
Silent button (without click) that does not demerit

Perfect for the occasional player, it will allow you to build, or renovate your arcade cabinetat a lower cost.

30mm clear clip-on arcade button.

Color
Quantity

Transparent clip-on button with no markings and no click.
It is perfect for an arcade or Bartop with a plexiglass or metal control panel.

It is however compatible with thicker wood panels, but the clips will not activate.

This generic button is a bit more sensitive to pressure than the big brands.
A slight pressure will activate the integrated micro switch.

It is possible to glue or print a sticker inside to customize your button.
A common ground chain, connected to the ground with the other buttons, is necessary for the proper functioning of the button.
You can mix and match the colors with other HX reference buttons of the same size.

This wide range of buttons will allow you to choose a harmonious design, without compromising on quality or performance.


Features:

- Max hole size: 30 mm
- Maximum mounting plate thickness: 3.7mm
- Estimated lifetime: 500,000 times
- Thimbles required: 2.8mm (although not intended, this button also works with 4.8mm)
- - Available colors: fluorescent yellow, yellow, blue, green, red, white, black (smoke) and purple.


- Optional: 35 cm cable with a 2.8mm lug and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card)

Câble Dupont et Cosse 2.8mm

HX-PU037CVI

Data sheet

Color
Blue
Green
Purple
Red
Smoke
White
Yellow
Button Size
30 mm
Maximum thickness of the control panel
3 mm
Luminous
Non
Button shape
Convexe
With Clic
No
Translucent
Translucent
Brand
Générique
Metallic color
No

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?


Please contact us!

16 other products in the same category