Sanwa square pink button

€4.49

OBSF-24-KK square button, pink.
It is a button that contains the same switch (SW-68) as the other more classic buttons of the Sanwa brand.

Square button, pink color, Sanwa Denshi.

Quantity

Ideal for a metal or plexiglass control panel (3.9 mm max).
This pink square button is equipped with a no-click microswitch, which will allow you to press it repeatedly very quickly.
Although this button is not intended to be used for action buttons. You can definitely use it as a main button (Feet and Fists).

Its color is perfect to personalize your terminal and associate it with characters (like Princess Peach, or Kirby).

This button is given to work 1 million times.

Feel free to download the exact dimensions of the button in the dedicated section.

This button requires a common ground cable (grounded) and a cable to connect to your system (not included).
The required lugs are 2.8mm. However, 4.8mm lugs will work just fine.

This button requires a hole with 20.1mm sides.

You can use this button on a deeper panel, however, the clip for holding the button will not be active.

- Optional: 35 cm Cable with 1 lug 2.8mm and 1 Dupont connector for GPIO port (Raspberry PI / Odroid / Xinmotek card)

Reference OBSF-24KK-P

Data sheet

Color: Pink
Luminous: Non
Button shape: Flat
With Clic: No
Translucent: Non translucent
Brand: Sanwa
Metallic color: No
Shape: Square

Specific References

Download

notice OBSF 24KK

Download (2.42MB)

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!